Setting the energy mode for a location

Configure Energy Hub to use active energy and power (kWh, kW) or apparent energy and power (kVAh, kVA) for its analysis and displays. You can set the energy mode at the organization, region, or site level.

NOTE: Energy Hub only displays apparent energy and power if these measurements are available from a monitoring device. Energy Hub does not calculate this data if it is not available from the device.

NOTE: An organization has a default energy mode setting. Regions inherit this setting from the organization. Sites inherit the setting from the regions. Manually setting the energy mode for a region or site overrides the inherited setting.

To set the energy mode for a location:

1. In Energy Hub, go to Investigate and select the Asset view or Energy view.
2. In the organization tree, select the location that you want to configure the energy mode for.
3. In the information panel for the location, on the Info tab, from the options menu (three dots), select Edit to open the information panel editor
4. In the information panel editor, under Information, find the Energy mode box and select the mode for this location.
5. Select Save.

TIP: You can also configure the energy mode for a location in Setup > System setup, in the information panel for the location.